Human rights are basic rights that belong to all of us simply because we are human. They embody key values in our society and are an important means of protection for us all, especially those who may face abuse, neglect and isolation. Most importantly, these rights give us power and enable us to speak up and challenge the poor treatment from a public authority.
The Universal Declaration of Human Rights or UDHR is a milestone document in the history of human rights. Drafted by representatives with different legal and cultural backgrounds from all regions of the world, it set out, for the first time, the fundamental human rights to be universally protected. The power of the Universal Declaration is the power of ideas to change the world. It inspires us to continue working to ensure that all people can gain freedom, equality and dignity. The Declaration was adopted by the UN General Assembly in Paris on 10 December 1948 during its 183rd plenary meeting. The UDHR holds the world record as the most translated document except for the Bible.
The 75th anniversary of the Universal Declaration of Human Rights will be celebrated on 10 December 2023. During the 75th anniversary celebrations, the aim is to educate and increase global knowledge and awareness of the UDHR and its enduring relevance for our times and the future; promote attitude change by countering the increasing scepticism of, and rollbacks against human rights by establishing that human rights are never relative and must always be upheld as what unites all of humanity. It also empowers and mobilises by offering concrete knowledge and tools to help people better fight for their rights.
Human Rights Day is observed every year on 10 December and commemorates the day in 1948 the United Nations General Assembly adopted the Universal Declaration of Human Rights. The date was chosen to honour the United Nations General Assembly’s adoption and proclamation, on 10 December 1948, of the Universal Declaration of Human Rights or UDHR, the first global enunciation of human rights and one of the first major achievements of the new United Nations. The formal establishment of Human Rights Day occurred on 4 December 1950. It is also on this day that the five-yearly United Nations Prize in the Field of Human Rights and Nobel Peace Prizes are awarded. When adopted, the declaration was proclaimed as a common standard of achievement for all peoples and all nations, towards which individuals and societies should strive by progressive measures, national and international, to secure their universal and effective recognition and observance.
In the decades since the ratification of the UDHR, human rights have, in real terms, become more recognised and more guaranteed across the globe. The Universal Declaration of Human Rights sets out a broad range of fundamental rights and freedoms to which all of us are entitled. It guarantees the rights of every individual everywhere, without distinction based on nationality, place of residence, gender, national or ethnic origin, religion, language, or any other status.
Although the Declaration its broad range of political, civil, economic, social and cultural rights is not a binding document, it inspired more than 60 human rights instruments which together constitute an international standard of human rights. Today the general consent of all United Nations Member States on the basic Human Rights laid down in the Declaration makes it even stronger and emphasises the relevance of Human Rights in daily lives.
In South Africa, Human Rights Day is celebrated on 21 March, in remembrance of the Sharpeville massacre which took place on 21 March 1960. This massacre occurred as a result of protests against the Apartheid regime in South Africa. It is celebrated on 11 December in Kiribati.
Each year, Human Rights Day has a different theme. In 2021, the focus was on young people and how one is never too young to make a difference in the world. In 2022, Human Rights Day is focusing on how rights are the beginning of peace within societies, and a way to create a fairer society for future generations.
If you want to commemorate Human Rights Day, you can speak up for what you care about, volunteer or donate to an organisation or cause that you believe in, make sure you choose fair trade or ethically made products and gifts and listen to those who have stories to tell which you must share with others.
We’re winding down to a new year and this poem is about the reflections we usually do at this time of the year. What reflections have you done about 2022 and what are your hopes and aspirations for 2023?
As the year winds down and the old start to give way to the new Its time to take a break and look back on the year that just flew
Did everything go your way or was anything awry and absurd? What went well, and what can be bettered? Was there any learning this year? Were you a better version of yourself this year?
2023 is that chance we get annually To take stock and have another try, that’s the new year’s beauty This year let’s do things differently, Let us be grateful for what we have
Family and friends, work and play in perfect balance In 2023, let our life provide us with that beautiful fragrance Here’s hoping your life is the best one this coming year One that brings with it all that you need and makes your troubles disappear
As we start preparing for the new year, a common resolution is to be more productive and I am always on the lookout for productivity hacks that I can use.
Productivity is more than doing more things or ticking tasks off your to-do list. Productivity means only focusing on accomplishing important things. It is the ratio between the output of goods and services and the input of resources consumed in the process of production. Productivity is the ratio between the output of wealth and the input of resources used in production processes.
The ability to be productive is one of the critical determinants of professional success and personal happiness. Those who can consistently produce good quality output at a sustainable rate can advance in work and life. Being productive boosts morale and creates excellence.
Personal productivity impacts the quality and quantity of results produced. Thus, it’s crucial to improve productivity because higher levels of productivity translate to a better personal and professional life and allows to achieve much more in a given period. Being productive can help one prioritise tasks, manage time and resources efficiently, and frees up time for more rewarding activities.
So in no particular order, here are some of my favourite productivity hacks and some which are new to me and that I plan to use next year.
Plan Ahead: One of the best tools for being productive is to plan, be it a day, a week, a month, or even a year. I prefer to do a very broad plan for the year and refine it as I plan for a month and week and then a detailed plan for a day. I like to use Trello and create to-lists with cards per week. Within that card, I plan my week which helps me. The best part is ticking off a task which gives one a sense of satisfaction. A good schedule allows one to note down all tasks and not miss anything important. This also allows you to focus on what is important and should be completed first before focusing on the next important task. It would also help to note the tasks in the order of importance and start the day with the most important task, followed by the next and so on.
Break Down Goals: Any goal when broken down into its parts becomes easier to achieve. If a task is large or something that does not seem easily achievable, then when it is broken down into easily achievable parts, as each part gets ticked off, it becomes easier to accomplish and checking them off makes you feel you are in sight of the goal and seeing the progress also shows you are doing something to get to the end.
Don’t Obsess with Emails: A big drag on productivity is checking emails and other messages as soon as you hear the ding. Research shows that when people were limited to checking their email just three times per day, their stress levels decreased significantly. Those who limited their email checking also felt that they were more able to complete their most important work and felt a greater sense of accomplishment at work.
Learn to Say No: It is hard to say no, especially when the request comes from someone who has authority over you but saying no shifts the way our brain thinks and reacts to situations, allowing us more ability to make decisions for ourselves which affects our mental health. Saying no helps to prioritise leading to new opportunities that wouldn’t have been achievable by saying yes at the same time setting boundaries.
Use Website Blockers: This is something I started doing a few months back and it is a godsend when I am focusing on something. Website blockers help us stop popping over to distracting and unnecessary websites that stop us from being productive.
The Two-Minute Rule: When you start your day, there will be numerous small tasks that crop up. The rule of thumb is should be this – if a task can be completed in two minutes or less, do it and get on with your other tasks, otherwise, add the task to your To-Do list and do it later.
Group Similar Tasks: Batch similar tasks so you can complete them with the same frame of mind. This will make your work process flow smoothly and help you do more in less time.
Avoid Multitasking: I am guilty of this, as I am sure many of you reading this post. Though it may be tempting to do two or more things simultaneously, multitasking does more harm than good. Research shows that about 98% of people are less productive when they multitask as they are not focusing on a single task. Our brains cannot perform multiple tasks at the same time and in moments where we think we’re multitasking, we’re likely just switching quickly from task to task. Focusing on a single task is a much more effective approach.
Start the Day with either a Tough or Easy Task: This is a tough one and a personal hack. The way one starts the day dictates the flow of the rest of the day. You can either start by doing the most demanding task first, so everything else feels more effortless, or do the easiest thing first to gain valuable momentum. When the easiest tasks are completed first, ticking some items off the To-Do list is a good boost to the rest of the day. On the other hand, when a difficult task is finished first, it takes a huge load off your shoulders and the rest of the day becomes easier without the task hanging over your head.
Take Regular Breaks: Breaks are very important to be productive. Breaks give the mind a much-needed chance to recover from intense focus, prevent decision fatigue, relieve stress, increase creativity and help improve memory and focus. Learning to meditate during a mental break helps to relax the mind and body.
Use the Pomodoro Technique: A great technique to boost productivity is the Pomodoro technique which is tomato in Italian. Here, one works in short bursts for say 25 minutes and then takes a 5-minute break. This is one Pomodoro. After four pomodoros, take a longer, more restorative 15-30 minute break. This technique works because the human mind can concentrate on the same thing for a short span. I prefer to work for 50 minutes and take a 10-minute break, but you could use any time frame that works for you.
Work Near Natural Light: This is a simple but potent productivity hack. Working near natural light improves sleep quality, improves mental health, helps in the circadian rhythm, and physically improves Vitamin D levels in the body which is essential for several core bodily functions, including regulating the immune system, maintaining body weight, and ensuring healthy cognitive function. A simple productivity hack is to create your workspace near natural light. Exposure to sunlight is believed to improve sleep, thereby contributing to your well-being and productivity levels.
Detach from Work after you are Done: Once you finish work for the day, detach from it and if possible, mute email and phone notifications until the next morning. This allows you to return the next morning with a fresh mind and perspective. If you can, separate your workspace from your personal space and this is even more important when you work from home.
Schedule Time for Self-Care: To be productive daily, self-care is essential. Self-care activities allow us to recharge ourselves to prevent burnout. Self-care can be anything that helps us relax and unwind. Reading, watching television, a relaxing bedtime ritual, a 10-minute walk, meditating, painting, or anything else.
What’s your favourite productivity hack? If I have missed any that you swear by, please share them so all of us can benefit from it.
Gadwal: The Gadwal saree is a handcrafted woven sari style in Gadwal of the Jogulamba Gadwal district and has been registered as one of the Geographical indicators of Telangana. The sarees, which consist of a cotton body with a silk pallu are most notable for the zari which is also given a new name as Sico saris. The weave is so light that the saree can be packed in a matchbox. The Brahmotsavas at the Tirupati temple begin with the deity’s idol being adorned with Gadwal Saree.
Mythology tells us that Gadwal weavers are the direct descendants of Jiveshwar Maharaj – the first weaver of Hindu Gods and Goddesses. The sarees were originally popular as festive and religious wear, worn during pujas and other functions. The weavers of the sari were sent to Benares so that they could perfect the art of weaving but retained no influence from Uttar Pradesh, and instead relies on South Indian aesthetics. These sarees are woven traditionally according to the interlocked-weft technique or the Kuppadam or Tippadam or Kotakomma, also called Kumbam in terms of the border designs. Therefore, these are also known as Kotakomma or Kumbam saris. The most noteworthy feature remains the gold and silver zari work on the border of the sari, which is always made of silk.
Narayanpet: Dating to the 17th century when the Maratha King Shivaji visited the town of Narayanpet, it is believed some weavers came with the king and settled down here and continued the traditions of this saree, which is influenced by both Maharashtra and Telangana. Narayanpet sarees are made from cotton as well by mixing silk with cotton. Their borders and pallus are very traditional and come in contrasting colours with special pallus and simple borders. Regarded as the garment of the gods, Narayanpet saris have been used to drape the idols of deities and were worn exclusively by aristocrats.
A unique process is employed for the manufacture, where eight saris are made at one go on a loom. Hence, instead of seven yards of fabric being mounted on the loom, 56 yards of silk are mounted on the loom at a single time. One Narayanpet cotton sari takes a day or two to be made, while silks take longer depending upon the complexity of the design.
Pochampally: Created in the Bhoodan Pochampally, the Pochampally saree has traditional geometric patterns in the Paagadu Bandhu or Ikat style of dyeing. Pochampally Ikat’s uniqueness lies in the transfer of intricate design and colouring onto warp and weft threads first and then weaving them together globally known as double ikat textiles. The fabric is cotton, silk and sico, a mix of silk and cotton. Increasingly, the colours themselves are from natural sources and their blends. India’s flag carrier, Air India has its cabin crew wear specially designed Pochampally silk sarees. Pochampally fabrics has found a place in UNESCO’s tentative list of world heritage sites as part of the iconic saree weaving clusters of India.
One of the most telling signs of a Pochampally silk saree is the intricate geometric design over the fabric. Another characteristic of Ikat textiles is an apparent blurriness to the design, a result of the extreme difficulty the weaver has in lining up the dyed yarns so that the pattern comes out perfectly in the finished cloth and is a feature that is almost prized by textile collectors. A standard saree takes a weaver family of four around ten days to make. The saree received the GI tag in 2005.
Banarasi: Known for their intricate artwork inspired by the Mughals with intertwining florals and foliate motifs, the Banarasi saree is synonymous with the city of Benaras or Varanasi. The sarees are among the finest in India and are known for their gold or silver brocade or zari, fine silk and opulent embroidery. The weaving process involves three people – the weaver, the person who revolves the ring to create bundles and the motif artist. It takes between two weeks to a month and even longer 15 days to six months to weave a Banarasi sari depending upon the complexity of the design and pattern. There is historical evidence of the existence of these fabrics since the Rig Vedic period which is between 1750 and 500 BCE and these fabrics are said to have gained immense popularity during the Mughal era.
In 2009, the Banarasi saree secured the Geographical Indication or GI rights for the Banaras Brocades and sarees. There are four main varieties of Banarasi saree, which include pure silk or Katan, Organza or Kora with zari and silk; Georgette, and Shattir, and according to the design process, they are divided into categories like Jangla, Tanchoi, Vaskat, Cutwork, Tissue and Butidar. Primary colours and bright jewel tones form the typical colour palette of this craft. With a focus on environmental sustainability, a new generation of Benarasi brocade weavers are starting to use vegetable-dyed yarn to attain the same effect.
Chikankari: Chikankari is an ancient form of white floral embroidery, intricately worked with needle and raw thread. Translated, the word means embroidery or thread or wire and the embroidery is done on cotton, organdy, voile, silk, cambric, georgette, and terry cotton. The origins of Chikankari are shrouded in mystery and legend. Some historians say that it is a Persian craft, brought to the Mughal Court of Emperor Jahangir by his consort Mehrunissa or Noorjahan. Today, this delicate traditional craft is practised in and around the city of Lucknow. Chikankari has six basic stitches and over thirty-five other traditional stitches used in various combinations. The embroidery is Mughal-inspired and the motifs show a strong influence from the screens present in the Taj Mahal. The base fabric is usually in pastel colours and is lightweight which highlights the embroidery. Chikan began as a type of white-on-white or whitework embroidery. White thread is embroidered on cool, pastel shades of light muslin and cotton garments though today chikan embroidery is also done with coloured and silk threads in colours to meet fashion trends. The piece begins with one or more pattern blocks that are used to block-print a pattern on the ground fabric. The embroiderer stitches the pattern, and the finished piece is carefully washed to remove all traces of the printed pattern. Chikankari received the Geographical Indication status in December 2008.
Baluchari: A fabric worn by women in West Bengal and Bangladesh, Baluchari is known for its depictions of mythological scenes from the Mahabharata and the Ramayana on the pallu of the saree. During the Mughal and British eras, they had a square design in the pallu with paisley motifs in them and depicted scenes from the lives of the Nawab of Bengal. During the Mughal and British eras, they had a square design in the pallu with paisley motifs and depicted scenes from the lives of the Nawab of Bengal. The main material used is silk and the sari is polished after weaving. It used to be produced in Murshidabad but presently Bishnupur and its surrounding areas of West Bengal are the only places where authentic Baluchari sarees are produced. It takes approximately one week to produce one such sari. In 2011, the Baluchari saree was granted the status of Geographical Indication for West Bengal.
Two hundred years ago Baluchari was produced in a small village called Baluchar in Murshidabad district, from where it got its name. In the 18th century, Murshidkuli Khan, the Nawab of Bengal patronised its rich weaving tradition and brought the craft of making this sari from Dhaka to the Baluchar village in Murshidabad and encouraged the industry to flourish. After a flood of the Ganges River and the subsequent submerging of the village, the industry moved to Bishnupur village. The Baluchari saree is made of tussar silk but started dying during the British colonial rule as most of the weavers were compelled to give up the profession. In the first half of the 20th century, the rich tradition of the Baluchari craft was revived. The colours used in Baluchari sarees are bright and cheerful.
Garad Silk: Woven in the Mushirabad district, Garad or Gorod means white refers to undyed silk. The silk is pure, very light and paper-like. Garad silk sarees are thus, characterised by a plain white or off-white body, an unornamental coloured border and a striped pallu. The most traditional of Garad sarees have a white body and red border and pallu. They are also called Garad – Korial Sarees where korial also means plain, which are white or off-white plain sarees. The whiteness and blankness represents purity and these sarees are generally worn during festivals. For example, during Durga puja, Bengali women can be seen offering their prayers to the Goddess draped in one of them.
Kantha: Originating from Bolpur in the Birhum district, Kantha is an embroidery style which was traditionally used in adorning quilts, but today is popular on sarees and other fabrics. Sarees with Kantha embroidery are typically made of pure silk, tussar silk or cotton. Each saree takes weeks or sometimes even months to prepare.
Also spelt Kanta, and Qanta, the Kantha embroidery is practised in Bangladesh and eastern regions of India, particularly West Bengal, Tripura and Odisha and is often practised by rural women. Kantha embroidery derives its name from the same word with two different meanings. Kantha means rag in Sanskrit, which reflects the fact that Kantha embroidery is made up of discarded garments. The word also means throat and was named due to its association with Shiva. The traditional form of Kantha embroidery was done with soft dhotis and saris, with a simple running stitch along the edges. Depending on the use of the finished product they were known as Lepkantha or Sujni Kantha.
The motifs traditionally designed on clothes and bedspreads were of birds, animals, fish, folk scenes and imagery that depicted different livelihoods in Bengal.
Tant: A traditional Bengali saree, the typical Tant saree is characterised by a thick border and a decorative pallu, woven using a variety of floral, paisley, and other artistic motifs. The traditional art of weaving jamdani, considered the best variety of tant, has been showcased by UNESCO as an intangible cultural heritage of humanity. Tant sarees are woven from cotton threads and distinguished by their lightness and transparency.
Tant and especially Jamdani and Muslin became famous in and around Dacca, now Dhaka in Bangladesh and Murshidabad in West Bengal during the Mughal era. The British colonial government tried to destroy this art to protect the textile industry of Manchester, but the tant culture managed to survive. With the division of the Bengal province during the partition of 1947, some of the weavers migrated to West Bengal and continued their craftsmanship there. Thus the tant weavers are now seen in both parts of Bengal.
The process of weaving Tant saris is elaborate and requires planning. First, the cotton threads are washed, bleached, re-washed, sun-dried and then dyed to achieve the desired colour. They are then starched and processed to make the yarns finer. To weave it, the patterns of the border, pallu and body are sketched out on cardboard and perforated to suspend from the loom to guide the weaving process. A few years before India’s independence, the jacquard loom was introduced into the Bangalar Tant technique and was so well-accepted that it is preferred even today.
Jamdani: Originally known as Dhakai or Daccai, an ancient textile weaving centre, after the city of Dhaka in Bangladesh today, Jamdani is a Persian term that came into popular usage during the Mughal rule of Bengal. An early reference to the Indian origins of muslin is found in the book of Periplus of the Erythraean Sea and the accounts of Arab, Chinese and Italian travellers and traders. The name Jamdani, is of Persian origin and comes from the word jam which means flower and dani meaning vase. The name is suggestive of the beautiful floral motifs on these saris. Jamdani is a hand loom woven fabric made of cotton, which was historically referred to as muslin. The Jamdani weaving tradition is one of the most time and labour-intensive forms of handloom weaving and is considered one of the finest varieties of muslin. Traditionally woven around Dhaka and created on the loom brocade, jamdani is rich in motifs.
Whether figured or flowered, jamdani is a woven fabric in cotton. This is a supplementary weft technique of weaving, where the artistic motifs are produced by a non-structural weft, in addition to the standard weft that holds the warp threads together. The standard weft creates a fine, sheer fabric while the supplementary weft with thicker threads adds intricate patterns to it. Each supplementary weft motif is added separately by hand by interlacing the weft threads into the warp with fine bamboo sticks using individual spools of thread. The result is a complex mix of different patterns that appear to float on a shimmering surface. The pattern is not sketched or outlined on the fabric but is drawn on graph paper and placed underneath the warp. Decorative motifs are typically in grey and white and often a mixture of cotton and gold thread was used. Patterns are usually of geometric, plant, and floral designs.
Tangail: A light superfine and beautiful fabric and saree from the Tangail district, today in Bangladesh, the Tangail saree is also known as Begum Bahar, a name suggestive of royalty and spring. Tangail is a weavers’ village in Bangladesh famous for its handloom industry and its trademark Tangail sarees. This thousand-year culture has been passed on from generation to generation and has evolved into an income-generating cottage industry today. Tangail weavers are direct descendants of the famous Muslin weaver community. So naturally, the fine art of their weaving is inimitable and unique. During the partition of Bengal in 1942, a dozen families of the Basak community from Nowakhali and Tangail came and settled in and around the Bardhaman or Burdwan district in West Bengal. With them, came their looms and their specialised weaving of Tangail sarees with finer counts of yarn.
A Tangail saree was originally woven on a pit loom and shuttle with a silk warp and cotton-weft or fillers. It was light, soft, and comfortable. The silk was later replaced by local cotton yarn owing to the scarcity of silk yarn and the infamous partition. The early weaving process was very complicated where the yarn was spun with a takli or spindle instead of a spinning wheel. Over time, new-age techniques, processes, and materials have evolved and today, pure cotton, khadi cotton, linen, tussar silk, matka silk, resham silk, rayon, blended silk, and zari are used to weave a Tangail saree. The Tangail saree is woven in two styles: Jacquard and Nokhshi Buti. For the Jacquard, the desired pattern is fed in the loom itself. When the entire yardage is ready, the loose threads are cut off to give it a smooth and clean finish. As opposed to this, in Nokshi Buti, everything including the fabric, motifs, and the border is worked on entirely by hand. That is why no two sarees come out the same.
The Tangail is a close cousin of the Jamdani and shares its technique of drawing and weaving wherein an extra weft is woven in for patterns. The only difference is two plain picks for the Tangail instead of one for the Jamdani are inserted after each extra weft. A sizing mixture or Kali which is made with rice and lime is applied by hand during the weaving process. As soon as a meter of cloth is woven, this mixture is rubbed on by hand to give the fabric a bit of body and crispness. This is repeated meter after meter till the entire saree is coated and becomes stiff like paper. It is then folded in a particular manner and tied with a piece of cloth.
There are more than 80 recorded ways to wear a saree, with the most common style being where the saree is wrapped around the waist, with the loose end of the drape worn over the left shoulder, baring the midriff. However, the sarei can be draped in several different styles, though some styles do require a sari of a particular length or form. Ṛta Kapur Chishti, a sari historian and recognised textile scholar, has documented 108 ways of wearing a sari in her book, ‘Saris: Tradition and Beyond’ which documents the saree drapes across the fourteen states of Gujarat, Maharashtra, Goa, Karnataka, Kerala, Tamil Nadu, Andhra Pradesh, Odisha, West Bengal, Jharkhand, Bihar, Chhattisgarh, Madhya Pradesh, and Uttar Pradesh. The French cultural anthropologist and saree researcher Chantal Boulanger categorised sari drapes in the following families:
Nivi Style: This style was originally worn in Deccan region and besides the modern nivi, there is also the kaccha nivi, where the pleats are passed through the legs and tucked into at the back. This allows free movement while covering the legs.
Bihar, Uttar Pradesh, Gujarati, Rajasthani Styles: In these states, the saree is worn similar to the nivi style but with the loose end of saree pallu placed in the front, therefore this style is known as sidha anchal or sidha pallu. After tucking in the pleats similar to the nivi style, the loose end is taken from the back, draped across the right shoulder, and pulled across to be secured in the back. This style is also worn by Punjabi and Sindhi Hindus.
Bengali and Odia Style: In this style, the saree is worn with a single box-pleat. Traditionally the Bengali style is worn with a single box pleat where the sari is wrapped around in an anti-clockwise direction around the waist and then a second time from the other direction. The loose end is a lot longer and goes around the body over the left shoulder. There is enough cloth left to cover the head as well.
Himalayan Style: The Kulluvi Pattu is the traditional form of woollen saree worn in Himachal Pradesh, a similar variation is also worn in Uttarakhand.
Nepali: Nepal has many different varieties of draping the saree, today the most common is the Nivi drape. The traditional Newari sari drape is, folding the sari till it is below knee length and then wearing it like a nivi sari but the pallu is not worn across the chest and instead is tied around the waist and leaving it so it drops from waist to the knee, instead the pallu or a shawl is tied across the chest, by wrapping it from the right hip and back and is thrown over the shoulders. Saris are worn with blouses that are thicker and are tied several times across the front. The Bhojpuri and Awadhi-speaking community wears the sari sedha pallu like the Gujrati drape. The Mithila community has its traditional Maithili drapes like the Madhubani and Purnia drapes but today those are rare and most saree is worn with the pallu in the front or the nivi style. The women of the Rajbanshi communities traditionally wear their sari with no choli and tied below the neck like a towel but today only old women wear it in that style and the nivi and the Bengali drapes are more popular today. The Nivi drape was popularized in Nepal by the Shah royals and the Ranas.
Nauvari: This drape is very similar to that of the male Maharashtrian dhoti, though there are many regional and societal variations. The style worn by Brahmin women differs from that of the Marathas. The style also differs from community to community. This style is popular in Maharashtra and Goa. Nowadays this style has become very famous in Indian cinema and is trending in Maharashtrian weddings.
Madisar: This drape is typical of the Iyengar and Iyer Brahmin ladies from Tamil Nadu. The traditional Madisar is worn using 9 yards saree. The saree and the tying style date back to ancient India, at least as far back as the period between 2nd century BC to 1st century AD when the antariya and uttariya garments were merged to make a single garment. Tamil Brahmin women are required to use this style after their marriage. The Iyer and Iyengar styles are slightly different and today this style is hardly worn, except on festive occasions, weddings and religious ceremonies.
Kodagu Style: This drape is confined to ladies hailing from the Kodagu district of Karnataka. In this style, the pleats are created in the rear, instead of the front. The loose end of the sari is draped back-to-front over the right shoulder and is pinned to the rest of the sari.
KarnatakaStyles: In Karnataka, apart from traditional Nivi sari, the saree is also worn in the Karnataka Kacche drape, which shows the nivi drape in front and kacche at the back, there are four Kacche styles, Hora Kacche, Melgacche, Vala Kacche or Olagacche and Hale Kacche.
KeralaStyle: The two-piece sari, or Mundum Neryathum is worn in Kerala. Usually made of unbleached cotton and decorated with gold or coloured stripes and/or borders.
Kunbi or Denthli Style: The Goan Kunbis and Gauda, use this way of draping sari or kappad. This form of draping is created by tying a knot in the fabric below the shoulder and a strip of cloth which crossed the left shoulder was fastened on the back.
Riha-Mekhela, Kokalmora, Chador/Murot and Mora Gamusa Style: This style worn in Assam is a wrap-around style cloth similar to other wrap-around from other parts of Southeast Asia and is very different in origin from the mainland Indian saree. It is originally a four-set of separate garments and quite dissimilar to the saree as it is a single cloth known Riha-Mekhela, Kokalmora, Chador/Murot Mora Gamusa. The bottom portion draped from the waist downwards is called Mekhela. The Riha or Methoni is wrapped and often secured by tying them firmly across the chest, covering the breasts originally but now it is sometimes replaced by the influence of immigrant mainland Indian styles which is traditionally incorrect. The Kokalmora was used originally to tie the Mekhela around the waist and keep it firm.
Innaphi and Phanek Style: This style of clothing worn in Manipur is also worn with a three-set garment known as Innaphi Viel, Phanek which is the lower wrap and a long-sleeved blouse. It is somewhat similar to the style of clothing worn in Assam.
Jainsem Style: A Khasi style of clothing worn in Meghalaya is made up of several pieces of cloth, giving the body a cylindrical shape.
The Sari Series, a non-profit project created in 2017 by Border&Fall is a digital anthology documenting India’s regional sari drapes providing over 80 short films on how to drape the various styles. The series was created with two objectives, the first to create an accessible and comprehensive cultural documentation of India’s saree drapes through short films and the second to address a needed perception shift of the garment.
Ilkal Sarees: Known because it is produced in the town of Ilkal, an ancient weaving centre since the 8th century, the uniqueness of the Ilkal saree is in the joining of the body warp with the pallu warp with a series of loops locally called the tope teni technique. The border colour is very dominating and is usually red or maroon. The distinctive feature of the Ilkal saree is the use of a form of embroidery called Kasuti. The designs used in Kasuti reflect traditional patterns like palanquins, elephants, and lotuses which are embroidered onto the saree. The main body design is usually made up of squares and rectangles. The Ilkal saris are woven using cotton warp on the body and art silk warp for the border and pallu portion. In some cases instead of art silk, pure silk is also used. The Tope Teni seragu has been regarded as a state symbol and was greatly respected during festival occasions. The sarees that are made for bridal wear are made of a particular colour called Giri Kumukum which is associated with the sindoor worn by the wives of the priests in this region. The weaving of the Ilkal saree is a household enterprise involving the participation of female members. One Ilkal saree takes about seven days to weave and are produced on pit looms.
Mysore Silk: One of Karnataka’s most famous exports, the Mysore silk is synonymous with the city of Mysuru and the silk factory was founded in 1912 by Sri Nalvadi Krishnaraja Wodeyar, the Maharaja of Mysore. Initially, the silk fabrics were manufactured & supplied to meet the requirements of the royal family and ornamental fabrics to their armed forces. After Indian independence, the Mysore State Sericulture Dept took control of the silk weaving factory. The saree zari contains 65% pure silver and 0.65% of gold, which is also the most distinct feature of the saree, along with the use of genuine silk that gives it a natural sheen and rich texture. Karnataka produces almost 45% of the country’s mulberry silk. Mysore silk has also received geographical identification. Mysore Silks are also one of the most expensive silk sarees in India and this has led to the production of duplicate Mysore silk saree production and sales. To avoid these issues, KSIC has implemented a unique ID, hologram-based design, and unique identification barcodes woven on each saree produced.
Kasavu Saree: Symbolic of Kerala’s tradition and culture, the traditional Kasavu saree was made by hand from cotton yarn with borders made of golden threads. Believed to have originated in the Buddhist era, the white and gold sarees are unique due to their natural hues, texture and gold border which adds to their elegance. No occasion in Kerala feels complete without the Kasavu saree. The term kasavu refers to the zari or gold thread used in the border of the saree and the name comes from a material used in the weaving and production of these sarees. The origin of the kasavu saree can be traced back to when women would wear a two-piece cloth called settu mundu, more popularly known as the mundum neriyathum. The mundum neriyathum rose in popularity during the Buddhist era, and its design has been inspired by the Greco-Roman attire, Palmyrene, a long piece of unstitched cloth with a coloured border.
The identity of the saree comes from the geographical cluster they are associated with. The Indian government has identified three clusters in Kerala – Balaramapuram, Chendamangalam and Kuthampully – that have been given a Geographical Indication or GI tag and all three clusters produce kasavu sarees. A plain saree with a simple border takes roughly around three to five days. Ones with motifs and heavier work take longer than that. The sarees are priced depending on the time taken on their production, along with the gold used in the zari or kasavu.
Chanderi: Emerging between the 2nd and 7th centuries, Chanderi sarees are produced from three types of fabrics – pure silk, cotton and silk cotton and are synonymous with the town of Chanderi which is on the boundary of Malwa and Bundelkhand. In the 11th century, the trade locations between Malwa, Medwa, central India and south Gujarat increased the region’s importance. Around 1350, Koshti weavers from Jhansi migrated to Chanderi and settled there and the textile business of Chanderi reached its peak during the Mughal period. Traditional coin, floral art, peacocks and modern geometric designs are woven into different Chanderi patterns. The saris are among the finest in India and are known for their gold and silver brocade or zari, fine silk, and opulent embroidery.
Maheshwari: Originating from the town of Maheshwar, the Maheshwari saree is made of silk and cotton in a variety of designs woven using brocade and zari. Dating to the 18th century, the sarees were initially made of pure silk, but over time, cotton also came to be used. An interesting story behind the origin of these sarees is that a famous queen had once ordered a large number of artisans and craftsmen from Surat and Malwa to design a unique saree of 9 yards, later termed the Maheshwari saree. These cloth pieces were used as special gifts for the royal guests of the palace. A unique feature of the Maheshwari saree is that each has a specific name of its own, which indicates its distinctness. The sarees may be plain at the centre and have neatly designed borders, or they may have different variations of stripes and checks. The sarees fall under 5 broad categories namely Chandratara, Chandrakala, Beli, Baingani Chandrakala and Parbi. The Baingani Chandrakala and Chandrakala are plain ones, while the Beli, Chandratara, and Parbi come with stripes or checks.
Karvati: Hailing from the Vidarbha region, Karvati silks are made from Tussar with a grainy, textural feel. What is unique about the silk used in Karvati saris is that it is exclusive to this specific region that is rich in high-quality silk cocoons, straight from the wild. The tribes hailing from this area assume the responsibility of protecting the silk cocoons until they are ready to be harvested. The Tussar is unlike any other silk; it has a unique shade of deep yellow-brown.
The word karvat is a Marathi term that refers to a saw-tooth pattern. Karvati is the name lent to the style of the border rather than the fabric itself. What is different about the saree is the technique and the mixed usage of yarn. The border is woven out of mercerized cotton yarns with traditional temple motifs of various sizes, using an extra warp while the rest of the sari is woven using pure, hand-reeled Tussar silk which provides a texture that has irregular stubs all over. The saree is woven using a three-shuttle, tapestry style of weaving with a pit loom mounted with a wooden lattice dobby in the Nagpur style on the top of the loom. This means that it uses three different styles of weaving at the same time.
Paithani: Dating to the Satvahana Dynasty that ruled between the second century BC and the second century AD, Paithani sarees are fine silk handloom sarees get their name from the town in which they originated, Paithan in Aurangabad. Available in both six and nine yards, the most interesting part about the Paithani handloom is that both sides of the saree look the same, including the border and the pallu. This feature is the telltale sign of a handloom Paithani. As Paithani sarees are woven from naturally dyed threads, they can usually be found only in basic colours. Each saree usually has two dominating colours, one on the saree and the other on the border and pallu. The Paithani is characterised by borders of an oblique square design, and a pallu with a peacock design. Among other varieties, single-coloured and kaleidoscope-coloured designs are also popular. The kaleidoscopic effect is achieved by using one colour for weaving lengthwise and another for weaving width-wise.
The Paithani is a sari made of silk and zari with a plain weave, with weft figuring designs according to the principles of the tapestry. Traditionally, Paithanis had coloured, cotton muslin fields that often contained considerable supplementary zari patterning. However, in the 19th century, silk fields were also woven. Due to its proximity to the Ajanta caves, the influence of Buddhist paintings can be seen in the woven Paithani motifs. These sarees are made of silk in which there is no extra weft forming figures. Weaving could take between 18 and 24 months, depending upon the complexity of the design. In the days of Peshwas, the borders and the pallu were made of pure gold mixed with copper to give it strength spun into a fine wire called the zari. In recent times, zari is made of silver, coated with gold plating. In the border woven with a zari, ground-coloured silk patterns are added as supplementary weft inlay against the zari usually in the form of a flower or a creeping vine.
Bomkai: Also known as the Sonepuri Saree, the Bomkai Saree is a handloom saree from the Bomkai village and has a GI tag. Usually made of cotton, these sarees are also made of silk for special occasions. During the time of Ramai Dev the then ruler of Patna, it was introduced in Sonepur. The borders and pallus are usually designed with fishes as it is believed to be a sign of success and affluence. The sari is normally dyed in red, black and white.
Khandua: A traditional bandha or ikat saree, Khandua is also known as Maniabandi or Kataki and is worn during weddings with a special type of fabric worn by Lord Jagannath which contain texts of the Geeta Govinda on them. The word Khandua in Odia translates to the cloth worn in the lower half of the body. Traditionally Kentuli Khandua is offered to Jagannath as lower cloth. The weaver communities of Maniabandha and Nuapatana of Cuttack traditionally wove this kind of fabric and during the rule of the Gajapatis, the sarees were made and transported to the Jagannath Temple. Nilakantha Deva, the King of Badakhemundi was offered khandua sari made of one piece of khandua silk called caukandika. Khandua is traditionally red or orange in colour with the red colour prepared naturally from the sal tree. The design motif has an auspicious elephant that represents Buddha surrounded by a trailing vine with peacocks in it, a large many-petaled flower, an animal unique to Orissa known as Nabagunjara. The elephant in Khandua ikat from Nuapatana usually varies from elephant motives in ikat from the Sambalpuri saree as well as the ikat from other parts of Orissa. The Khandua has plain borders contrary to borders with motifs in the case of the other ikats from the state.
Pasapali: Also known as the Saktapar, the Pasapali saree is a bandha or Ikat handloom sari woven mainly in the Bargarh district. The name Pasapali is derived from pasa or gambling games using a chess board and these sarees have intricate check patterns of contrasting colours resembling the chess boards which gives it its name.
Sambalpuri: A traditional handwoven ikat where the warp and the weft are tie-dyed before weaving, the Sambalpuri saree is known for its incorporation of traditional motifs, all of which have deep symbolism in red, black and white that represent Odia culture. The high point of these sarees is the traditional craftsmanship of the Bandhakala, or the tie-dye art reflected in their intricate weaves, also known as Sambalpuri Ikkat. In this technique, the threads are first tie-dyed and later woven into a fabric, with the entire process taking many weeks. These sarees also have a Geographical Indication or GI tag associated with them. Traditionally, craftsmen created the ikats with images of flora or fauna or with geometrical patterns, but recently the ikats depict portraits and landscapes are also being designed. The unique feature of this form of designing is that the designs are reflected almost identically on both sides of the fabric. Once the fabric is dyed it can never be bleached into another colour. It is believed that this art migrated to western Odisha along with the Bhulia community who fled north India in 1192 after the fall of the Chouhan empire at the hands of the Mughals.
Phulkari: Punjab’s folk embroidery, Phulkari which means floral work also includes motifs and geometrical shapes. In Punjabi, Phul means flower and Akari means the shape and so Phulkari means the shape and the direction of flowers which symbolise life. The main characteristics of Phulkari embroidery are the use of darn stitch on the wrong side of coarse cotton cloth with coloured silken thread. The traditional varieties of Phulkaris are large items of cloth and include Chope, Tilpatr, Neelak and Bagh. Sometimes, the Bagh is given separate categorisation of its own as on other varieties of a Phulkari, parts of the cloth are visible, whereas, in a Bagh, the embroidery covers the entire garment so that the base cloth is not visible. Today, in contemporary designs, the simple and sparsely embroidered dupattas and shawls made for everyday use, are referred to as phulkari, while clothing items that cover the entire body, made for special and ceremonial occasions such as weddings are called baghs or large gardens. The Phulkari continues to be an integral part of Punjabi weddings to the present day.
In the past, as soon as a girl was born, mothers and grandmothers would start embroidering Baghs and Phulkaris, which were to be given away at the time of her marriage. Depending on the status of the family, the parents would give a dowry of 11 to 101 Baghs and Phulkaris which were also passed from one generation to the next as heirlooms. The hallmark of Phulkari is making innumerable patterns by using long and short darn stitches. There were no pattern books and embroidery was worked entirely from the reverse of the fabric and the designs were not traced. Techniques and patterns were not documented but transmitted from word of mouth and each regional group was identified with the style of embroidery or design. The most favoured colour was red and its shades. Animals and birds represented success, beauty, pride, and goodwill and different fruits symbolised wealth, prosperity, and fertility. Wheat and barley stalks with ears were also common motifs. Silk and mulmul or soft cotton muslin fabrics were used because of their purity and longevity and it was believed that the virtue and character of a woman gave shape to the Phulkari.
There are different theories about the origin of Phulkari. One such belief is that this embroidery was prevalent in different parts of the country as far back as the 7th century, but survived only in Punjab. Motifs similar to the ones found in Phulkari are also found in Kashida of Bihar and some of the embroideries of Rajasthan. Another thought is that this style of embroidery came from Iran where it was called Gulkari, also meaning floral work.
Gota Patti: Gota patti or gota work is a type of Indian embroidery that originated in Rajasthan. Small pieces of zari ribbon are applied onto the fabric with the edges sewn down to create elaborate patterns. Gota embroidery is used extensively in South Asian weddings and formal clothes. Originally real gold and silver metals were used to embroider, but these were eventually replaced by copper coated with silver as it would become very expensive and today, even more, inexpensive options are available.
Kota Doriya: A handloom fabric, Kota Doriya is woven on a traditional pit loom in such a way that it produces square checks pattern on the fabric. The delicately wrought checks are locally known as khats. Onion juice and rice paste are smeared onto the yarn making it so strong that no additional finishing is needed. Kota Doriya sarees are made of pure cotton and silk and have square-like patterns known as khats on them. The chequered weave of a Kota sari is very popular with a very fine weave and weighs very little.
It is said that Jhala Zalim Singh of Kotah brought weavers from Mysore, in the mid-17th century, as they wove a characteristic small squared lightweight cotton fabric that looked like graph paper and was suitable for turbans. Since the weavers had come from Mysore, the fabric produced was called Kota Masuriya and was woven on narrow 8-inch looms to make the traditional paags or turbans and later on, broader looms were used for gossamer-light saris. Silk was added to the cotton in a 20:80 ratio approximately to give the sari strength. Nowadays hand woven silk Kota Doriya saris have also become popular. At first, the design known as a buti was small and regular but larger designs are now made according to fashion and taste. A very ornate saree can take one month to make and is an heirloom piece to be treasured. A genuine Kota Doriya sari will contain the GI mark woven in one corner indicating that it has been hand woven using real silver and gold thread.
Leheriya: Leheriya is a traditional style of tie and dye practised in Rajasthan which is bright in colour, with a distinctive pattern. The word Leheriya comes from the word leher, meaning wave and the tie-dye technique results in diagonal stripes, which look like waves on the fabric. To create diagonal stripes, the craftsmen use a special method of resist-dyeing, where the material, is rolled up diagonally length-wise and then tied tightly at intervals before the actual dyeing process begins. Delicate, light fabrics such as thin cotton voile, fine silk and chiffon are preferred, as they allow the colour to penetrate through the rolled cloth. The fabric is wrapped around a wooden pole, usually while it is still wet or in a semi-dry state. The thread that ties up the fabric acts as a resist, yielding a pattern of diagonal stripes after dyeing. The thickness of the thread and the distance between the ties may be varied to obtain stripes of different widths.
An astounding variety of Leheriya fabrics are produced using this simple process. A panchranga or five-colour design is the most auspicious since the number five is considered special in Hindu scriptures. Another beautiful pattern is the satranga, flaunting the seven colours of the rainbow.
Kanjeevaram: A silk saree which is worn on special occasions, the Kanjeevaram or Kanchipuram is made in the Kanchipuram region. This saree has also been recognised and given the Geographical Indication tag by the Indian government. The sarees are distinguished by their wide contrast borders with temple borders, checks, stripes and floral patterns as traditional designs. The patterns and designs in the Kancheepuram sarees are inspired by the images and scriptures in South Indian temples or natural features like leaves, birds and animals and have rich woven pallus showing the paintings of Raja Ravi Varma and the epics of Mahabharata and Ramayana. As of 2008, an estimated 5,000 families were involved in sari production with 25 silk and cotton yarn industries and 60 dyeing units in the region.
The saris are woven from pure mulberry silk thread, which along with the zari or gold thread comes from South India. To weave a Kanjeevaram saree. three shuttles are used. While the weaver works on the right side, his aide works on the left side shuttle. The border colour and design are usually quite different from the body. If the pallu has to be woven in a different shade, it is first separately woven and then delicately joined to the saree and the part where the body meets the pallu is often denoted by a zigzag line. In a genuine Kajeevaram silk saree, the body and the border are woven separately and then interlocked together. The joint is woven so strongly that even if the saree tears, the border will not detach and this differentiates the Kanjeevaram silk saree from the others. The sarees vary widely in price depending on the intricacy of work, colours, patterns, craftsmanship and materials used.
Koorainaadu: A traditional handloom weaving centre, Koorainadu sarees are by their checks and stripes pattern for which plain looms are used. It is made with pure silk and fine-twisted mercerized cotton yarn, in both warp and weft, in the ratio of 2:1, giving every Koorainadu saree a silk look. A peculiar characteristic of this saree is the formation of cotton checks by the interlacing of warp and weft during weaving which can be woven only by an experienced weaver. The sarees are hence stiffer and easier to hold the pleats which make them easier to wear. Koorainadu sarees are mostly worn by the womenfolk of the Hindu community green and yellow colours are used to make it auspicious and so it is often worn by married women wishing for long-lasting wedlock. The nine-yard Koorainadu saris are made with cotton or cotton and silk, in checks or striped patterns with a contrasting border in yellow. Saris with wide borders are called temple saris because they are offered to the deities in the temple.
Sungudi: Traditional cotton sarees from the Madurai area, Sungudi sarees are defined by the pattern of block prints and tie and dye designs. The origins of Sungudi can be traced back to the Sourashtrians who brought the art with them when they migrated to South India under the patronage of King Thirumalai Naicker in the 17th century. In Saurashtra, the word sungudi relates to the Sanskrit word sunnam meaning round, representing the circular dots that are printed on the fabric as a prominent and special motif.
The dots in the saris are said to be inspired by the cosmos which is why most Sungudi sarees remind one of a starry night. Tying the knots of the sari demands a great amount of precision from the craftsman. Ideally, a three-inch gap between the body and the zari border and also with the pallu lends a neat and symmetrical look to the crude dots. The designs are sometimes marked with a pencil on the fabric for ease in the process. The Sungudi art has seven basic designs that can be modified with different permutations and combinations to provide variety and highlight the creativity of the craftsman. The smaller the dot the better the expertise and this comes only with extensive practice and time. In the early days people used rudimentary methods like tying the knots with mustard or peppercorn seeds. Although this seems like a rural and unpolished method, its success lay in its simplicity. Authentic Sungudi is more than just tying knots. There is a lot of meticulousness that goes into producing a piece that looks effortless. Once the knots are tied in the desired pattern, the sari is clamped which involves pleating, twisting, folding and wrapping it tightly before dyeing it for around two hours. Then the sari is subjected to two rounds of washing with cold water with an organic fixing agent followed by drying and ironing. The resultant fabric is a beautiful sheet like stars in the sky. In 2005 the art of Sungudi tie and dye got the GI recognition tag.
In the next part, the last one, we will do the last few states and also learn about some interesting saree drapes.
Memories and Such 
